Ignite Plumbing & Heating

Shower repairs in Ipswich

A shower that drips, changes temperature or has lost its flow can have several possible causes. We check the shower and water supply before suggesting a cartridge, valve, seal or other repair.

What we handle

Ignite Plumbing investigates shower plumbing faults in Ipswich homes, including mixer and thermostatic valves, wastes, accessible pipework and pump-related symptoms. For electric showers, plumbing faults can be assessed, while electrical faults need an appropriately qualified electrician. The aim is to identify the cause before committing to parts.

  • Dripping shower heads and valves
  • Unstable temperature or lukewarm water
  • Low flow and pump-related symptoms
  • Leaks around accessible wastes, seals and connections
  • Mixer, thermostatic and electric-shower plumbing faults assessed

Describe the symptoms

Tell us whether the problem is a drip, temperature change, poor flow or a leak outside the enclosure. Photos of the controls and any visible make or model help.

Check the system

The engineer checks the relevant supply, fittings and accessible parts to narrow down whether the issue lies with the shower valve, cartridge, head, waste or another part of the system.

Discuss the options

We’ll explain whether servicing, a compatible replacement part or a larger repair is sensible. Parts availability and access vary; the scope and price are agreed before work begins.

Repair and test

Following the agreed work, the shower is checked for operation, flow and visible leaks at accessible points.

Dripping showers

A drip after the shower has drained is different from a continuous leak. A worn cartridge, valve seal or connection may be involved, so we establish where and when water appears.

Temperature changes

A thermostatic cartridge can be affected by scale or wear, but changes in the hot-water supply can produce similar symptoms. Checking both helps avoid replacing the wrong part.

Low pressure or weak flow

A blocked shower head, restricted supply, valve issue or pump problem can all reduce flow. We look at the system rather than assuming a new pump or shower is required.

Wastes, seals and enclosures

Water outside the tray or staining below a bathroom needs careful tracing. A waste connection, failed seal, tile joint or pipework can each be responsible; the appropriate repair depends on the source and access.

What does a shower repair cost?

There is no reliable one-price answer: it depends on the diagnosis, access and compatible parts. Send details and photos when enquiring; the scope and price are agreed before work starts.

Pricing and booking

Tell us what needs attention and share your postcode. We assess the work and agree the scope and price before starting; parts and further labour are discussed before proceeding.

Why does my shower go hot and cold?

A thermostatic cartridge, restricted flow or a change in the hot-water supply could be involved. Testing the system helps identify the cause.

How much does a shower repair cost in Ipswich?

It depends on the fault, access and parts needed. We’ll discuss the work and agree the price before starting.

Can you repair an electric shower?

We can assess plumbing-related issues such as supply, connections and leaks. Electrical faults and electrical component work must be handled by an appropriately qualified electrician.

Is an older shower worth repairing?

Often a replaceable part is the issue, but age, condition and availability of compatible parts matter. We’ll explain the options after checking the shower.

What should I do if the shower is leaking into the room below?

Stop using the shower and, if water is actively escaping and it is safe to do so, isolate the water supply. Contact us with photos and your postcode so we can discuss the next step.

Call 07825 930939

Not sure what the fix needs? Take the 60-second plumbing quiz →